System I uses 92131 7 1/2", 92132 8 1/2", and 92133 10" O.C. snap tape, and 92121 snap carriers. Draperies are fabricated to match and hemmed panel widths shown in the Fabrication guides. Prepared snap tapes are sewn to the drapery panels, and pleats are sewn on both front and back sides of the fabric at designated marks on the snap tape.

Snap Tape 92131, 92132, 92133

• Spaced snap tape is of woven nylon to hold heading erect.
• Tape can be washed or dry-cleaned, and maintains a shrink factor of less than 3 percent.
• Snaps are of nickel-plated brass. They are corrosion and rust resistant, and can be washed or dry-cleaned.
• Tape spacing determines the stack depth and width.
• Snap tape is marked for pleats.
• Pleat depth allows for fullness of 40, 80, 100, and 120 percent.
• The spacing also proportions the heading size to the window size. Pleats are spaced further apart as snap spacing increases
  
  

Information Page Links: